Our standard LaserSource interconnect cable with bare wire pigtails for user termination into non-Arroyo fixtures, and features shielded twisted pair wires for good modulation performance. When using one pin to carry current (as with 6300 or 4200-DR applications), this cable is rated to 4A. When used with our 4300 instruments ad both pairs are used, the cable is rated to 8A because the 4300 drivers use two pins for anode and two pins for cathode. All connections are made through 20 gauge wires. Photodiode connection is carried through the cable, but the interlock pins (pins 1 and 2) are shorted at the DB-9M (instrument) end and carried through to the fixture end of the cable.