Welcome to XSoptix.com!

Credit Card Information

Laser Pumping Heads

Laser Pumping Heads

The laser module is an OEM CYLINDRICAL block. This allows rotation of the pumping chamber, thus giving flexibility during the production and optimization of a laser system.

 

With a pumped length of 23mm the laser rod is shorter than other similar products in the market. This is advantageous for regenerative amplifiers since higher energy is available before self-focusing appears.

The pumping laser diode bars are mounted using our clamping technology. The main features of  the solder-free concept of the clamping technology, exclusively used by monocrom, are:

  • Long Lifetime and High reliability due to the lack of mechanical stress using our unique clamping process vs. soldering
  • Minimum "smile", < 0.5micrometers
  • Small thermal resistance due to the reduction in contact resistance between the electrodes and the laser bars
  • NO micro-channels are needed to reach low thermal resistances
  • Large Storage Temparture range from -60DegC to +85degC

Product Crystal Emission Wavelength(nm) Output Power Datasheet
PH-PPP Series Nd:YAG 1064 85W - 120W (CW) / 100W - 400W (QCW)
PH-1800-QCW n/a n/a n/a
PH-720-CW-KRP4-YAG5 Nd:YAG 1064 220W (CW)
PH-900-QCW-YAG4 Nd:YAG 1064 300W (QCW)
PH-5400-QCW-YAG6 Nd:YAG 1064 1800W (QCW)